home *** CD-ROM | disk | FTP | other *** search
/ BBS Toolkit / BBS Toolkit.iso / qbbs / febbs100.zip / HISTORY.DOC < prev    next >
Text File  |  1990-08-06  |  12KB  |  276 lines

  1.   ╔════════════════════════════════════════════════════════════════════╗
  2.   ║░░░░ The history of FEBBS ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░║
  3.   ╚════════════════════════════════════════════════════════════════════╝
  4.  
  5.     1.00  1990-08-06
  6.  
  7.  
  8.     ■ Changed version number to 1.00.
  9.       This is to show that this program is now at a level where
  10.       it can be called acceptable. From here it's just fixing minor
  11.       flaws and if something very new Big appears then it's time for
  12.       version 2.00 :-)
  13.  
  14.     ■ Added support for external utils Like Shez, QEdit, DP.
  15.       You can specify three different external viewer. Archive, Text
  16.       and Binary viewers. Also added A DOSShell function from inside
  17.       the editor. Note ... to be able to get room for these utils
  18.       and the dosshell the Files.Bbs that is loaded in the editor
  19.       will be saved to disk and loaded out of memory. It will when
  20.       you have finished the shell reload from disk. It is YOUR
  21.       responsibillity NOT to tamper with the Files.Bbs when in shell
  22.       from FEBBS. I can guarantee that FEBBS doesn't like that at all!!
  23.       Also observe that if you have just performed a Hurl and not yet
  24.       placed the descriptions and you make a shell you will get less
  25.       memory for the shell than if you place the descriptions before.
  26.       This is because Febbs have to store these descriptions in memory
  27.       so that you later on can place them.
  28.       So take make it a habbit of placing the descriptions before
  29.       you shell to avoid any problems that might occour.
  30.  
  31.     ■ Re done the memory manegment totaly in Febbs. This to enable the
  32.       the functions of External support programs.
  33.  
  34.     ■ Enlarged the allowed length of the areadescription so that the
  35.       maximus header wouldn't get chopped of..
  36.  
  37.     ■ Moved "Adopt Files" inside the editor instead of havaing it
  38.       in the main menu. That way i was able to cut down on keystrokes
  39.       before you where able to edit your areas.
  40.  
  41.     ■ The Last Time !!. Now is the last time that you will have to
  42.       Delete FEBBS.CTL when upgrading to a new Version.
  43.       Redone the whole setup part so now the setup file is 4Kb
  44.       in size and containing a lot of "air". So when implementing new
  45.       functions that needs to be set up i just use the "air".
  46.  
  47.     ■ If, when hurling Files, a file already exists in the area that
  48.       You are hurling to and You choose to overwrite it then the
  49.       description will NOT be transfered to the new area.
  50.       Reason: To prevent dupe entries in Files.Bbs.
  51.       I simply assumes that you already have the correct description
  52.       in the area you are hurling to because you are mostly hurling
  53.       from your Upload directory.
  54.       This means that if all the tagged Files existed in the area you
  55.       choose to hurl to then you will not be transfered to that area.
  56.  
  57.     ■ Febbs is now Mouse Aware. That is if You have got a mouse then
  58.       you can use while moving around in FEBBS. The left Button is the
  59.       same as "Enter" and the Right is the same as "Escape"
  60.  
  61.     ■ Added Area Number in the ChooseFileArea selectlist.
  62.       When Choose Area window is active it is now possible to "hotkey"
  63.       to a certain area by entering its number and pressing Enter.
  64.  
  65.     ■ When using the del key at the end of a line, the line below will
  66.       now be only partialy moved up if not the whole line fits
  67.       in the space that is left in the above line.
  68.       Confused :-) Try it !
  69.  
  70.     ■ Tab now moves the current line to position 32, and if the line
  71.       is to long to fit it will be wrapped. This only applies to
  72.       lines with descriptions. If Tab is pressed on a line that is
  73.       a "File entry" then nothing will happen.
  74.  
  75.     ■ If in aXa mode the @Z ( Zoom ) lines in files.bbs will Not
  76.       be shown in the filelist.
  77.       Also Fixed so that Ctrl-D ( Remove missing files from Files.Bbs )
  78.       will Not remove the @Z lines in Files.Bbs.
  79.  
  80.     ■ If in Maximus/aXa mode when creating a filelist Febbs vill
  81.       scan for Avatar codes and skip those in the Filelist.
  82.  
  83.     ■ Added ability to create your daily filelists. Both Total and News
  84.       list. Can be run in Batch mode. News List Start with "N" on the
  85.       command line and Full list with "F". Or why not both "FEBBS N F".
  86.       If a file called FEBBHEAD.TXT is present in the same directory
  87.       as Febbs then that one will be used as header in the lists.
  88.       The fileareas to include in the filelist is chosen in the setup.
  89.       When Creating a total list two other lists will aslo be created.
  90.       A filearea overview list and a list containing the directories
  91.       of the areas. That is a list that can be used by your mailer as
  92.       a list of Frequable Directories.  If you got a directory that you
  93.       wish to be frequable but not in the filelist simply create a file
  94.       called FEBBOK.TXT containing that directory ( or directories ).
  95.       That list will at runtime be added to the directory list just like
  96.       the header in the Filelist.
  97.  
  98.     ■ Original Alt-F Function Removed. Alt-F now displays Contents
  99.       of the file on current line. Try it and you'll understand what
  100.       i mean.
  101.  
  102.     ■ Added support for Axa.
  103.  
  104.     ■ Move tagged lines inside Editor. Tag the lines you want to
  105.       move. Position yourself at the spot where you want 'em and
  106.       press F4. Viola !
  107.  
  108.     ■ Added Choose Colour option to Febbs. Note that you must enter
  109.       The Save Setup part in order to make the Colour changes take
  110.       place in all of Febbs.
  111.  
  112.     ■ Added Tag and hurl of Files and descriptions.
  113.  
  114.     ■ Alt-R, Remove Line and if line is a Filedescription you will
  115.       be asced if you wish to delete the file also. Like Ctrl-Y but
  116.       deletes the file as well.
  117.  
  118.     ■ Alt-W, Sort a marked block. Press Alt-W. Size the highlighted
  119.       Block with the arrowkeys. Press Enter to sort marked block.
  120.       Escape to exit sort routine.
  121.  
  122.     ■ If you choose " F2 -Save " inside the editor you are no longer
  123.       returned to the main menu. This to let you save as you edit
  124.       instead once when your done.
  125.  
  126.     ■ Added automatic deletion of files in Files.Bbs that doesn't exist
  127.       in the directory. Just press Ctrl-D from inside the editor and
  128.       the area loaded in the editor will be scanned and a message will
  129.       be displayed telling you that either files where deleted from
  130.       list or files where NOT deleted from list.
  131.       Suggested By Dirk Zaal
  132.  
  133.     ────────────────────────────────────────────────────────────────────
  134.  
  135.     0.06  1990-06-30
  136.  
  137.     ■ Added automatic CRC check of the EXE-file upon execution of
  138.       program. Any changes to the code will immidiatly be discovered
  139.       and an error message will be displayed. This to prevent you
  140.       from viruses and illigeal hacks of this program.
  141.       >>> Note ! This will NOT allow you to Pack this program with
  142.       LZEXE the Exepacker.
  143.  
  144.     ■ Added option to let FEBBS save backup files of FILES.BBS
  145.       when saving. The backup files are called FILES.BAK.
  146.       Suggested by Anders Brink.
  147.  
  148.     ■ Febbs can now be started from anywhere and still find its
  149.       control file, FEBBS.CTL, just as long as the control file
  150.       resides in the same place as FEBBS.EXE. This only applies
  151.       to Dos version >= 3.10. If you have a version < 3.10 then
  152.       you have to run FEBBS from the same directory as its controlfile.
  153.       Suggested by Anders Brink.
  154.  
  155.     ■ Added Option to Copy or Move files and descriptions
  156.       Between Areas.
  157.       Suggested by several users.
  158.  
  159.     ■ Enlarged the Choose Area Window to get a better look over wich
  160.       areas you have.
  161.       Suggested by Anders Brink.
  162.  
  163.     ■ Added option to add GIF Info to description of GIF file from inside
  164.       the editor.
  165.  
  166.     ■ Redesigned the menus to cut down on keystrokes.
  167.       Suggested by Anders Brink.
  168.  
  169.     ■ Added Maximus BBS support.
  170.       Suggested by Anders Brink.
  171.  
  172.     ■ Re structured the whole setup part. Now you choose to save once
  173.       instead of after every edited setup part. Also checked that all
  174.       the variables got set correctly when you save. I never had any
  175.       trouble with this but a user of mine had.
  176.       Reported by Christer Andersson.
  177.  
  178.     ■ Realised that Febbs added a blank line at the end of the edited
  179.       Files.Bbs when saving it. If you for example edited a certain
  180.       Files.Bbs 10 times in a row it would have 10 extra blank lines
  181.       at the end. This is now Fixed.
  182.  
  183.     ■ The Editor now starts in INSERT mode.
  184.  
  185.     ■ Added posibillity to Copy a line of text inside the editor.
  186.       Thus allowing to copy descriptions of files. Also added the
  187.       possibility to move a line inside the editor. Nice if you want
  188.       to move an adopted file to a different location within Files.Bbs
  189.       Suggested by Robert Maierhofer.
  190.  
  191.     ■ Enhanced the editor regarding deleting of chararcters and line wrap-
  192.       around. If you delete the last character in a line the next line
  193.       will now be automagicaly moved up one line. Also fixed the "Enter"
  194.       keys behavior in INSert mode. Now works as it should.
  195.  
  196.     ■ The Cursor bar when choosing area wouldn't stick to the 3 first
  197.       areas and went to the 1st instead.
  198.       Reported by Bob Sprenger.
  199.  
  200.     ■ Fixed problem when Files.Ra was not found.  With som force you could
  201.       trick FEBBS to think that Files.Ra already had been read alltough i
  202.       hadn't. With som Funny (?) results.
  203.  
  204.     ■ Changed Method of reading Files.Ra. That part is now twice as fast.
  205.  
  206.     ■ Changed som cosmetic stuff during area select. Mostly for people
  207.       with less than 10 Areas.
  208.  
  209.     ────────────────────────────────────────────────────────────────────
  210.  
  211.     0.05   1990-05-29
  212.  
  213.     ■ The first Users made themselves wisible !!!
  214.  
  215.     ■ On public demand :-) A clearscreen after exit !!
  216.  
  217.     ■ GIF resoloution now added when adopting files.
  218.  
  219.     ■ Removed blanks after entering path to RA. Could cause trouble
  220.       if you added a lot of blanks after the path.
  221.  
  222.     ■ A box on the mainscreen now show witch area you have choosen.
  223.  
  224.     ■ If you from inside the editor choose Alt-F to look inside an
  225.       archive and the choosen file is a valid GIF file you will see
  226.       info about the GIF instead.
  227.  
  228.     ■ If no valid files where to be found in a area and you choose
  229.       Alt-D or Alt-F to either delete or look inside a file your
  230.       machine would hang
  231.  
  232.     ■ Changed the backspace to "destructive" instead of just moving the
  233.       cursor left.
  234.  
  235.     ■  Added Insert status on the editor screen.
  236.  
  237.     ────────────────────────────────────────────────────────────────────
  238.  
  239.     0.04   1990-04-25
  240.  
  241.     ■ Added Look inside archive option from inside the editor.
  242.  
  243.     ────────────────────────────────────────────────────────────────────
  244.  
  245.     0.03   1990-04-23
  246.  
  247.     ■ Added Delete file from inside the editor.
  248.  
  249.     ■ Fixed a minor calculation error.
  250.  
  251.     ■ Fixed some "cosmetic" functions to the program overall.
  252.  
  253.     ■ STILL No sound from any user !!!!
  254.  
  255.     ────────────────────────────────────────────────────────────────────
  256.  
  257.     0.02ß  1990-03-28
  258.  
  259.     ■ Fixed the Path to RA setup.
  260.  
  261.     ■ Added "Add missing files" and it's setup part.
  262.  
  263.     ■ Changed some colours just to try to make things
  264.       easier for those with monochrome monitors.
  265.  
  266.     ■ No sound from any user of FEBBS ! ( Yet ??? ).
  267.  
  268.     ────────────────────────────────────────────────────────────────────
  269.  
  270.     0.01ß  1990-03-01
  271.  
  272.     ■ The Very First release. A True ßeta. Just to se if anyone was
  273.       interested.
  274.  
  275.  
  276.